{"product_id":"matek-system-3-in-1-low-voltage-alarm-tracker-single-loss-alarm-module","title":"Matek System 3 In 1 Low Voltage Alarm Tracker Single Loss Alarm Module","description":"\u003cp\u003e3 In 1 Matek Low Voltage Alarm Tracker Single Loss Alarm Module\u003c\/p\u003e\r\n\r\n\u003cp\u003eSpecification:\u003c\/p\u003e\r\n\u003cul class=\"list-style-bullet-point\"\u003e\r\n\u003cli\u003eOperating voltage range: 5.2 - 26V DC, 2 - 6Cells LiPo\u003c\/li\u003e\r\n\u003cli\u003eStatic power consumption: 10mA\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating current: 120mA (When LED flashes and beeps)\u003c\/li\u003e\r\n\u003cli\u003eInput voltage cutoff setting: 3.4 ~ 3.7V \/ cell (red LED indicator)\u003c\/li\u003e\r\n\u003cli\u003eDouble buzzer: 85db + 85db\u003c\/li\u003e\r\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuper bright blue 5050 LED, 20 lumens, 0.2w\u003c\/li\u003e\r\n\u003cli\u003eSize: 20 x 30 x 6mm\/ 0.79\" x 1.18\" x 0.24\" (L x W x T)\u003c\/li\u003e\r\n \u003c\/ul\u003e\r\n\u003cp\u003eFeature:\u003c\/p\u003e\r\n\u003cul class=\"list-style-bullet-point\"\u003e\r\n\u003cli\u003eUse the two tranches lever channel of the receiver, this Matek BB ring low voltage alarm can take the initiative to trigger the alarm, that you can more easier to find your helicopters, multi-rotor , cars.\u003c\/li\u003e\r\n\u003cli\u003eThe alarm will trigger according to the accelerator signal. It the accelerator signal have no signal change, the alarm will trigger automatically.\u003c\/li\u003e\r\n\u003cli\u003eSuitable for all kinds of  Helicopters, multi-rotor, Cars etc.\u003c\/li\u003e\r\n \r\n\u003cp\u003eHow to use:\u003c\/p\u003e\r\n\u003cp\u003eBattery monitor function (F1)\u003c\/p\u003e\r\n\r\n\u003cp\u003eIt can monitor 2~6S LiPo voltage status and notify you once the cells reach the defined voltage.\u003c\/p\u003e\r\n\u003cp\u003eThe voltage threshold of alarm and flash can be customized between 3.4V-3.7V\/Cell.\u003c\/p\u003e\r\n\u003cp\u003e1.1 If the LiPo voltage is in the range of following, The BM3in1 will detect the cell numbers automatically when the LiPo is connected.\u003c\/p\u003e\r\n \r\n\u003cul class=\"list-style-bullet-point\"\u003e\r\n\u003cli\u003e7.4-8.6V: 2cells LiPo\u003c\/li\u003e\r\n\u003cli\u003e11.1~12.9V: 3cells LiPo\u003c\/li\u003e\r\n\u003cli\u003e14.8~17.2V: 4cells LiPo\u003c\/li\u003e\r\n\u003cli\u003e18.5~21.5V: 5cells LiPo\u003c\/li\u003e\r\n\u003cli\u003e22.2~25.8V: 6cells LiPo\u003c\/li\u003e\r\n\u003cli\u003eThe BM3in1 will alarm ?????Be????? and the voltage threshold red LED will be shown.\u003c\/li\u003e\r\n\u003c\/ul\u003e \r\n\u003cul class=\"list-style-bullet-point\"\u003e\r\n\u003cli\u003eHold the button 3 seconds to enter the setting of the voltage threshold\u003c\/li\u003e\r\n\u003cli\u003ePress button to set the alarm threshold between 3.4-3.7V\/Cell(red LED)\u003c\/li\u003e\r\n\u003cli\u003eThe value will be saved and exit if no action within 10 seconds\u003c\/li\u003e\r\n\u003cli\u003eDuring the using of LiPo, BM3in1 will detect the voltage always\u003c\/li\u003e\r\n\u003cli\u003eIf the total voltage is below ?????threshold * cells?????, the alarm and blink will be triggered with ?????Be..Be..Be???????????????\u003c\/li\u003e\r\n\u003cli\u003eIf the total voltage rise again, the alarm and blink will be suspended\u003c\/li\u003e\r\n \u003c\/ul\u003e\r\n\u003cp\u003e1.2 If the LiPo voltage is out of the aforesaid range. The BM3in1 will alarm ?????Be..Be..Be????? and 4 red LEDs light. Pls check if the battery total voltage is below 3.7V*cells\u003c\/p\u003e\r\n \r\n\u003cp\u003e2. Discovery buzzer function (F2)\u003c\/p\u003e\r\n \r\n\u003cp\u003eIt is easy to use the function, Just plug it in one Aux channel(e.g. Gear).\r\nMove the toggle switch to one side or another side, the BM3in1 will alarm ?????BeBeBeBeBe????? and blue LED blink.\u003c\/p\u003e\r\n \r\n\u003cp\u003e3. Signal loss alarm function (F3)\u003c\/p\u003e\r\n \r\n\u003cp\u003eIt can warn you if you turn off the transmitter first by mistake, if you have trouble finding a model in the long grass?????\u003c\/p\u003e\r\n \r\n\u003cp\u003eTurn on the transmitter first. Hook BM3in1 to the receiver THRO channel, then plug battery into model. It will detect the loss of TX signal, and emit a loud alarm ?????BeBe?????BeBe?????BeBe?????????? and  the blue LED blink.\u003c\/p\u003e\r\n \r\n\u003cp\u003eRX power on, the alarm and blink will be triggered as following\u003c\/p\u003e\r\n \r\n\u003cp\u003eTurn off the transmitter first. and keep one minute.\u003c\/p\u003e\r\n\u003cp\u003eThe radio power on, but no action of stick or no signal change within one minute.\u003c\/p\u003e\r\n \r\n\u003cp\u003eUsage Guidelines links: http:\/\/v.youku.com\/v_show\/id_XNzUyMTI5ODcy.html\r\ninstruction manual: http:\/\/www.mateksys.com\/downloads\/BM3IN1_Manual_CN.pdf\u003c\/p\u003e\r\n \r\n\u003cp\u003ePackage Included: Matek low voltage alarm x 1\u003c\/p\u003e\n\u003c\/ul\u003e","brand":"NY","offers":[{"title":"Default Title","offer_id":30567684553,"sku":"DRO-160518-79-OPL-PRT-XXX-XXX","price":7.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1536\/9259\/products\/DRO-160518-79-OPL-PRT-XXX-XXX-01_0113905a-b7aa-4b87-ade4-95482b362f66.jpg?v=1571608999","url":"https:\/\/www.littohot.com\/fr\/products\/matek-system-3-in-1-low-voltage-alarm-tracker-single-loss-alarm-module","provider":"LittoHot","version":"1.0","type":"link"}